In partnership with: ZYFILM® and ZYPROFILM® are flexible film touch panels incorporating  ZYTRONIC’s patented projected capacitive technology (PCT™). The touch panels  are designed to be mounted to the rear surface of a rigid transparent substrate  (such as glass or plastic), and operated by touching the substrates front  surface.  Operation:  The associated electronic controller effectively divides the sensor into pixel-sized  sensing cells, using an array of embedded micro metal track electrodes, which are  not ITO (Indium Tin Oxide) based, and are virtually invisible when in front of a  powered display or rear projection film. These tracks are connected to the  electronic controller board, and an oscillation frequency is established for each  track. Using the theory of capacitance field effect, a touch on the overlay substrate  to which the sensor is mounted causes a change in the oscillating frequency of the  tracks around that particular point; the position of which is then determined by the  driver software. Unlike conventional capacitive systems where the operator  touches the actual conducting surface of the sensor, the active component of  ZYFILM® / ZYPROFILM® is embedded within the sensor panel and protected by  the mounting substrate.  The driver software allows the touch sensor panel to interface with the host  computer’s operating system by emulating the behavior of a computer mouse, and  translates touches into mouse movements and clicks.  ZYFILM®and ZYPROFILM® are available with various surface preparations to  facilitate bonding to the supporting substrate or window   Terms and Conditions  /  Privacy Police © Iberhermes 2017 inform@iberhermes.com Terms and Conditions  /  FAQs